Kleben und kleben lassen!
Willkommen
Gast
. Bitte
einloggen
oder
registrieren
.
1 Stunde
1 Tag
1 Woche
1 Monat
Immer
Einloggen mit Benutzername, Passwort und Sitzungslänge
Neuigkeiten:
Übersicht
Hilfe
Einloggen
Registrieren
Science Fiction Modellbau Forum
»
Science Fiction Modellbau
»
Battlestar Galactica
»
The Battlestar Galactica Moebius SHOULD have given us.
« vorheriges
nächstes »
Drucken
Seiten:
1
2
[
3
]
Nach unten
Autor
Thema: The Battlestar Galactica Moebius SHOULD have given us. (Gelesen 13324 mal)
0 Mitglieder und 2 Gäste betrachten dieses Thema.
Eagle-1
Candidate
Beiträge: 60
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #50 am:
27. Juni 2022, 03:26:19 »
Here's more what I want!
Gespeichert
Eagle-1
Candidate
Beiträge: 60
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #51 am:
27. Juni 2022, 03:33:40 »
Here's the best I was able to do, but it does look better than stock... to me anyway.
Gespeichert
haui
Lieutenant
Beiträge: 467
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #52 am:
17. Juli 2022, 08:17:30 »
Ich watched the Films when i was a boy and i loved them.
So thanks for This buildt. I think i have to watch the Film again
IT is stunning what you are doing. IT is sooooo tiny.
I love it
Gespeichert
propdoc
IRON MODELER CHAMPION 2014
Fach-Moderator
Captain
Beiträge: 3862
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #53 am:
21. Juli 2022, 11:23:08 »
WOW, that is some serious dedication and scratchbuilding work!
Pretty awesome!
Gespeichert
Cheers! Thomas
urban warrior
Commander
Beiträge: 1065
Master of unfinished Projects
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #54 am:
21. Juli 2022, 22:55:10 »
Why did I come across this so late?
You're putting a lot of effort in refining your GALACTICA. Thank you for sharing this with us. And I am very excited to see some pictures from the original model. Seeing pictures of items used in filming gives me the opportunity to make some "greeblie archaeology". I am astonished what they used to kitbash the GALACTICA. At the rear sides it seems they used some german armed recovery vehicles and AFV's in some smaller scale (related to the inevitable Panther engine ventilation grids on the rear top). I can see a lot of battleship and cruiser turrets, halves of a steam locomotive and at the very rear the undercarriage of a 155mm Howitzer in 1/35 scale. I love it!
I am looking forward to your further progress!
Gespeichert
Cheers, Martin
--------------------------------------------------------------------
Gesendet von meinem Cyberdyne Systems Model 101
Eagle-1
Candidate
Beiträge: 60
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #55 am:
13. Dezember 2022, 20:51:12 »
Thank you all for the kind words! More to come.
Gespeichert
The Doctor
Lieutenant Commander
Beiträge: 644
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #56 am:
14. Dezember 2022, 17:42:50 »
Looks cool!
The Doctor
Gespeichert
Eagle-1
Candidate
Beiträge: 60
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #57 am:
23. Januar 2023, 07:38:24 »
Thank you Mr. Doctor!
Here's a little more.
Gespeichert
Ramirez
Lieutenant Commander
Beiträge: 513
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #58 am:
31. Januar 2023, 20:50:42 »
Crazy stuff.
Looking forward to see it finished.
Gespeichert
Grüße aus Hamburg
Eagle-1
Candidate
Beiträge: 60
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #59 am:
10. Februar 2023, 01:25:34 »
Little more.
Box stock:
Gespeichert
Eagle-1
Candidate
Beiträge: 60
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #60 am:
10. Februar 2023, 01:27:57 »
What I was able to do with it.
Gespeichert
Eagle-1
Candidate
Beiträge: 60
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #61 am:
10. Februar 2023, 18:01:37 »
I also squirted a little primer.
Gespeichert
Eagle-1
Candidate
Beiträge: 60
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #62 am:
09. März 2023, 22:51:55 »
Hey y'all! Another apology for the length in the reply, but this really is the soonest I could post it and it's STILL just sorta tacked in place so I could make a small update. This one, I believe, has improved the look. It mainly consists of fixing up those trenches and adding some detail on those pieces along the sides just below those trenches. As I asked before, and the consensus was the gap was just about right, so I didn't widen any. I thought it may need a little more gap, but as I got going, it seemed fine, so y'all was right!
Again, here's what it is straight outta the box:
Here, again, is what we went with:
All of those tanks on the upper and lower sections of those trenches are ROCO Sheridans #254 (on the real deal) and they are cut in half, right down the center.
As thus:
The tank tread we see glimpses of in a couple pictures. I think, come from the same little ROCO #215 plastered all over the sides of the engine of the Galactica. In this next picture you can also see the Sheridan's cut in half:
Now, on to my feeble attempts to create some of this and what I was able to do. I took the stock pieces for the Sheridan and sliced 'em. Sliced 'em good. I added some detail to those and had to make those tracks completely from scratch. With all these 1/144 kits I showed earlier, I was able to use the tracks... TWO TRACKS... cut in half length wise and wrapped that all the way around all these tracks you'll see next.
Y'all with the kit will know, we still mighty small here and this took me a couple days. ALL this has been practically constant work since that last update. Evenings, mainly, but every day.
Next, I decided to add a little bit to the interior of those gaps, which we can see into now, which means I had to create a wall inside there which got cut away on the stock kit when I cut the tanks in half. I took a bit of liberty here and added a couple scribe lines and a few detail pieces to add some lumps and bumps in there. Now, there are also a couple ladder/vent/teeth looking pieces on the original, so I added those too, sorta seen here:
Here's how all that came out:
You can also see those new walls I had to make. This "wall" also serves to align the top and bottom now and keep the alignment in place. I'll want to be able to open this model up later if I ever have to work on it, so I started that mod with this mod.
Some may have noticed, in those last pictures, that I have detailed the outer sides of the engine just a bit too. To me, one of the biggest improvements with this latest one was the dressing up of those pieces just under those drop tanks/fuel tanks along the sides. This mod was an ABSOLUTE pain in my diminished glute, but makes a very nice show, to me anyway. They are the crane section of ROCO #257.
Those pieces, along with the angled sections at the forward of the engine (the blade at the front of the ROCO), are from the same ROCO tanks also all along the sides of the original engine section, ROCO #257:
On the crane pieces along the sides, I sanded the originals off the kit piece and using that crane outline I was left with, I had to scratch each and every crane. I also had to keep the size consistent. The body of the 257 is what's on the engine section too, so I used the body on the kit piece to keep the size right as I was making them:
Ok, after writing all that, here's what I've ended up with.. Like I say, not completely permanent yet, but I think this one turned out OK.
Makes a difference this time I think.
Critique, criticism, comments, complaints and suggestions, as I've shown already, are 100% welcome and encouraged here.
Rob.
«
Letzte Änderung: 09. März 2023, 23:05:12 von Eagle-1
»
Gespeichert
Galactican
Captain
Beiträge: 3290
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #63 am:
10. März 2023, 22:41:11 »
Absolutely AMAZING! Thank you very much for sharing this build with us. Keep up the great work!
Gespeichert
Eagle-1
Candidate
Beiträge: 60
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #64 am:
10. März 2023, 23:00:39 »
Thank you! I didn't think anyone was even looking.
Gespeichert
The Doctor
Lieutenant Commander
Beiträge: 644
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #65 am:
12. März 2023, 16:45:17 »
The Doctor
Gespeichert
Eagle-1
Candidate
Beiträge: 60
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #66 am:
13. März 2023, 01:23:08 »
Zitat von: The Doctor am 12. März 2023, 16:45:17
The Doctor
Gespeichert
Eagle-1
Candidate
Beiträge: 60
Re: The Battlestar Galactica Moebius SHOULD have given us.
«
Antwort #67 am:
02. April 2023, 20:52:05 »
Hey y'all! Got the engine section a fair piece along now. I narrowed that gap between the top and bottom half and made the engine where it'll open in case I ever need to get it there. Comments, as always, welcome.
Gespeichert
Drucken
Seiten:
1
2
[
3
]
Nach oben
« vorheriges
nächstes »
Science Fiction Modellbau Forum
»
Science Fiction Modellbau
»
Battlestar Galactica
»
The Battlestar Galactica Moebius SHOULD have given us.